Software Testing Techniques

---

Software Testing Techniques

---

Table of Contents

1.     Introduction

2.     Software Testing Fundamentals

3.     White Box Testing

1.     The Nature of Software Defects

2.     Basis Path Testing

1.     Flow Graphs

2.     The Basis Set

3.     Deriving Test Cases

4.     Automating Basis Set Derivation

3.     Loop Testing

1.     Simple Loops

2.     Nested Loops

3.     Concatenated Loops

4.     Unstructured Loops

4.     Other White Box Techniques

4.     Black Box Testing

1.     Introduction

2.     Equivalence Partitioning

3.     Boundary Value Analysis

4.     Cause-Effect Graphing Techniques

---

Introduction

Because of the fallibility of its human designers and its own abstract, complex nature, software development must be accompanied by quality assurance activities. It is not unusual for developers to spend 40% of the total project time on testing. For life-critical software (e.g. flight control, reactor monitoring), testing can cost 3 to 5 times as much as all other activities combined. The destructive nature of testing requires that the developer discard preconceived notions of the correctness of his/her developed software.

Software Testing Fundamentals

Testing objectives include

1.     Testing is a process of executing a program with the intent of finding an error.

2.     A good test case is one that has a high probability of finding an as yet undiscovered error.

3.     A successful test is one that uncovers an as yet undiscovered error.

Testing should systematically uncover different classes of errors in a minimum amount of time and with a minimum amount of effort. A secondary benefit of testing is that it demonstrates that the software appears to be working as stated in the specifications. The data collected through testing can also provide an indication of the software’s reliability and quality. But, testing cannot show the absence of defect — it can only show that software defects are present.

White Box Testing

White box testing is a test case design method that uses the control structure of the procedural design to derive test cases. Test cases can be derived that

1.     guarantee that all independent paths within a module have been exercised at least once,

2.     exercise all logical decisions on their true and false sides,

3.     execute all loops at their boundaries and within their operational bounds, and

4.     exercise internal data structures to ensure their validity.

The Nature of Software Defects

Logic errors and incorrect assumptions are inversely proportional to the probability that a program path will be executed. General processing tends to be well understood while special case processing tends to be prone to errors.

We often believe that a logical path is not likely to be executed when it may be executed on a regular basis. Our unconscious assumptions about control flow and data lead to design errors that can only be detected by path testing.

Typographical errors are random.

Basis Path Testing

This method enables the designer to derive a logical complexity measure of a procedural design and use it as a guide for defining a basis set of execution paths. Test cases that exercise the basis set are guaranteed to execute every statement in the program at least once during testing.

Flow Graphs

Flow graphs can be used to represent control flow in a program and can help in the derivation of the basis set. Each flow graph node represents one or more procedural statements. The edges between nodes represent flow of control. An edge must terminate at a node, even if the node does not represent any useful procedural statements. A region in a flow graph is an area bounded by edges and nodes. Each node that contains a condition is called a predicate node. Cyclomatic complexity is a metric that provides a quantitative measure of the logical complexity of a program. It defines the number of independent paths in the basis set and thus provides an upper bound for the number of tests that must be performed.

The Basis Set

An independent path is any path through a program that introduces at least one new set of processing statements (must move along at least one new edge in the path). The basis set is not unique. Any number of different basis sets can be derived for a given procedural design. Cyclomatic complexity, V(G), for a flow graph G is equal to

1.     The number of regions in the flow graph.

2.     V(G) = E – N + 2 where E is the number of edges and N is the number of nodes.

3.     V(G) = P + 1 where P is the number of predicate nodes.

Deriving Test Cases

1.     From the design or source code, derive a flow graph.

2.     Determine the cyclomatic complexity of this flow graph.

o        Even without a flow graph, V(G) can be determined by counting the number of conditional statements in the code.

3.     Determine a basis set of linearly independent paths.

o        Predicate nodes are useful for determining the necessary paths.

4.     Prepare test cases that will force execution of each path in the basis set.

o        Each test case is executed and compared to the expected results.

Automating Basis Set Derivation

The derivation of the flow graph and the set of basis paths is amenable to automation. A software tool to do this can be developed using a data structure called a graph matrix. A graph matrix is a square matrix whose size is equivalent to the number of nodes in the flow graph. Each row and column correspond to a particular node and the matrix corresponds to the connections (edges) between nodes. By adding a link weight to each matrix entry, more information about the control flow can be captured. In its simplest form, the link weight is 1 if an edge exists and 0 if it does not. But other types of link weights can be represented:

• the probability that an edge will be executed,
• the processing time expended during link traversal,
• the memory required during link traversal, or
• the resources required during link traversal.

Graph theory algorithms can be applied to these graph matrices to help in the analysis necessary to produce the basis set.

Loop Testing

This white box technique focuses exclusively on the validity of loop constructs. Four different classes of loops can be defined:

1.     simple loops,

2.     nested loops,

3.     concatenated loops, and

4.     unstructured loops.

Simple Loops

The following tests should be applied to simple loops where n is the maximum number of allowable passes through the loop:

1.     skip the loop entirely,

2.     only pass once through the loop,

3.     m passes through the loop where m < n,

4.     n – 1, n, n + 1 passes through the loop.

Nested Loops

The testing of nested loops cannot simply extend the technique of simple loops since this would result in a geometrically increasing number of test cases. One approach for nested loops:

1.     Start at the innermost loop. Set all other loops to minimum values.

2.     Conduct simple loop tests for the innermost loop while holding the outer loops at their minimums. Add tests for out-of-range or excluded values.

3.     Work outward, conducting tests for the next loop while keeping all other outer loops at minimums and other nested loops to typical values.

4.     Continue until all loops have been tested.

Concatenated Loops

Concatenated loops can be tested as simple loops if each loop is independent of the others. If they are not independent (e.g. the loop counter for one is the loop counter for the other), then the nested approach can be used.

Unstructured Loops

This type of loop should be redesigned not tested!!!

Other White Box Techniques

Other white box testing techniques include:

1.     Condition testing

o        exercises the logical conditions in a program.

2.     Data flow testing

o        selects test paths according to the locations of definitions and uses of variables in the program.

Black Box Testing

Introduction

Black box testing attempts to derive sets of inputs that will fully exercise all the functional requirements of a system. It is not an alternative to white box testing. This type of testing attempts to find errors in the following categories:

1.     incorrect or missing functions,

2.     interface errors,

3.     errors in data structures or external database access,

4.     performance errors, and

5.     initialization and termination errors.

Tests are designed to answer the following questions:

1.     How is the function’s validity tested?

2.     What classes of input will make good test cases?

3.     Is the system particularly sensitive to certain input values?

4.     How are the boundaries of a data class isolated?

5.     What data rates and data volume can the system tolerate?

6.     What effect will specific combinations of data have on system operation?

White box testing should be performed early in the testing process, while black box testing tends to be applied during later stages. Test cases should be derived which

1.     reduce the number of additional test cases that must be designed to achieve reasonable testing, and

2.     tell us something about the presence or absence of classes of errors, rather than an error associated only with the specific test at hand.

Equivalence Partitioning

This method divides the input domain of a program into classes of data from which test cases can be derived. Equivalence partitioning strives to define a test case that uncovers classes of errors and thereby reduces the number of test cases needed. It is based on an evaluation of equivalence classes for an input condition. An equivalence class represents a set of valid or invalid states for input conditions.

Equivalence classes may be defined according to the following guidelines:

1.     If an input condition specifies a range, one valid and two invalid equivalence classes are defined.

2.     If an input condition requires a specific value, then one valid and two invalid equivalence classes are defined.

3.     If an input condition specifies a member of a set, then one valid and one invalid equivalence class are defined.

4.     If an input condition is boolean, then one valid and one invalid equivalence class are defined.

Boundary Value Analysis

This method leads to a selection of test cases that exercise boundary values. It complements equivalence partitioning since it selects test cases at the edges of a class. Rather than focusing on input conditions solely, BVA derives test cases from the output domain also. BVA guidelines include:

1.     For input ranges bounded by a and b, test cases should include values a and b and just above and just below a and b respectively.

2.     If an input condition specifies a number of values, test cases should be developed to exercise the minimum and maximum numbers and values just above and below these limits.

3.     Apply guidelines 1 and 2 to the output.

4.     If internal data structures have prescribed boundaries, a test case should be designed to exercise the data structure at its boundary.

Cause-Effect Graphing Techniques

Cause-effect graphing is a technique that provides a concise representation of logical conditions and corresponding actions. There are four steps:

1.     Causes (input conditions) and effects (actions) are listed for a module and an identifier is assigned to each.

2.     A cause-effect graph is developed.

3.     The graph is converted to a decision table.

4.     Decision table rules are converted to test cases.

 

Approach to Application Diagnostics

Performance testing is a measure of the performance characteristics of an application. The main objectives of a performance testing are to demonstrate the response time, transaction throughput and other performance attributes of a system meets the specifications. This paper describes about the Performance Testing goals, objectives, components, Prerequisites for performance testing, phases of performance testing and metrics captured during the Performance Testing.

Approach To Application Diagnostics

Ways to exceed Clients Expectation

• Keep your promises – Deliver the promised Quality & Adhere to Client’s requirement
• Adhere to Deadlines – Once you start adhering client’s deadlines & meet them, the client feels valued & satisfied
• Transparency in Project Progress – Client needs to be kept aware of what the current progress & regular feedback should be taken. Touch base with clients regularly during the course of your time working together. Send clients status updates. This makes your client feel very important and taken care of
• Continuous communication through emails & calls results in appreciation from client
• Given an opportunity try to educate clients in the weak areas so that he feels more confident & satisfied
• Grow your relationship with clients. Make sure your clients are subscribed to your Newsletter (which contains interesting INFORMATION, not just ads)
• Help the client in resource management through references of your contacts. Help them find the experts they need. (Big Plus! This will help with your strategic alliances)
• Work with your ideal clients. By working with your ideal clients, you will already be in a great position to satisfy your clients
• Provided Value Added Services & justify ROI for the purchases made by him
• Accept Feedback. Be open to feedback from your clients. Let them know you are interested in hearing what they have to say
• Have regular visit to Client’s location. Visits for a week or so should not be charged
• Be pleasant! This goes a long way. Clients want to be treated with respect
• Offer your knowledge as suggestions. You’re the expert. Share your expertise by offering suggestions
• Be clear about costs and fees. No one likes surprises

10 Contracts for your next Agile Software Project | Agile Software Development

10 Contracts for your next Agile Software Project | Agile Software Development.

10 mistakes new Linux administrators make | 10 Things | TechRepublic.com

10 mistakes new Linux administrators make | 10 Things | TechRepublic.com.

Storage Decisions’ Data Deduplication seminar series

Storage Decisions’ Data Deduplication seminar series.

Storage Decisions’ Disaster Recovery Planning seminar series

Storage Decisions’ Disaster Recovery Planning seminar series.

Storage Decisions’ Storage Virtualization seminar series

Storage Decisions’ Storage Virtualization seminar series.

Desktop and Application Virtualization: What it is, what it’s not, why IT managers should care

Desktop and Application Virtualization: What it is, what it’s not, why IT managers should care.

Design, Build and Test for Performance

Design, Build and Test for Performance.